What is mean well lpv 100 12 ?

Meanwell 24V 150W stands for the 150W LED power supply from Meanwell HLG series, specially made for LED lighting power supply.
The HLG series supports various DC output voltages including 12V, 15V, 24V, 30V, 36V, 42V, 48V, 54V. Select proper wattage and voltage to match your LED products; check the attached English datasheet for full specs.
Meanwell is a well-known brand with stable, trustworthy performance. This LED driver controls constant current and provides full protection, stabilizing lighting performance and prolonging LED lifespan.

Why choose Meanwell 24V 150W power supply?

Mean Well LPV-100-12 is a 100W constant voltage LED power supply from Mean Well LPV series, specially engineered to power all 12V DC LED lighting fixtures.

Model naming breakdown:
LPV = Constant voltage waterproof LED driver series
100 = Rated total output power 100W
12 = Fixed DC 12V output voltage with max 8.5A output currentMEAN WELL

It adopts fully sealed insulated plastic housing with IP67 dustproof & waterproof rating, supporting universal 90–264V global AC input for worldwide residential and commercial use. Built-in multi-protection circuits (short circuit, overload, over voltage) and 300VAC surge resistance prevent LED burnout and extend light service life. Fanless natural convection cooling delivers stable performance without noise.

This cost-effective Mean Well LED transformer is widely applied to 12V LED strips, advertising signage, landscape decorative lights and outdoor lighting projects. Complete technical parameters are available in the attached English datasheet for reference, backed by a 2-year official manufacturer warranty明纬(广州)电子有限公司

Why choose mean well lpv 100 12 ?

Mean Well LPV-100-12 is a cost-effective 100W 12V constant voltage waterproof LED driver, ideal for 12V LED strips, signage and landscape lighting projects worldwide.

As a classic model of Mean Well LPV series, it delivers stable 12V DC output with universal 90–264V wide AC input, compatible with power grids in most countries. The fully sealed IP67 plastic housing provides complete dust and water resistance, safe for both indoor and outdoor installation.

Built-in all-round safety protections including short-circuit, overload, overvoltage and surge protection effectively avoid LED damage and extend lighting lifespan. Fanless silent natural cooling eliminates fan failure risks, ensuring long-term stable operation with low maintenance needs.

This budget-friendly Mean Well LED transformer carries official 2-year manufacturer warranty and passes multiple international safety certifications. It is the preferred power solution for small to medium decorative lighting, advertising signs and cabinet light projects

Specification

CATEGORY	PARAMETER	LPV-100-5	LPV-100-12	LPV-100-15	LPV-100-24	LPV-100-36	LPV-100-48
OUTPUT	DC VOLTAGE	5V	12V	15V	24V	36V	48V
	RATED CURRENT	12A	8.5A	6.7A	4.2A	2.8A	2.1A
	CURRENT RANGE	0 ~ 12A	0 ~ 8.5A	0 ~ 6.7A	0 ~ 4.2A	0 ~ 2.8A	0 ~ 2.1A
	RATED POWER	60W	102W	100.5W	100.8W	100.8W	100.8W
	RIPPLE & NOISE (max.) Note.2	80mVp-p	120mVp-p	120mVp-p	150mVp-p	150mVp-p	150mVp-p
	VOLTAGE TOLERANCE Note.3	±8.0%	±5.0%	-	-	-	-
	LINE REGULATION	±1.0%	±2.0%	-	-	-	-
	LOAD REGULATION	±6.0%	±2.0%	-	-	-	-
	SETUP, RISE TIME Note.6	2000ms, 25ms / 230VAC	2000ms, 25ms / 115VAC	-	-	-	-
	HOLD UP TIME (Typ.)	50ms/230VAC	14ms/115VAC at full load	-	-	-	-
INPUT	VOLTAGE RANGE Note.4	90 ~ 264VAC	127 ~ 370VDC	-	-	-	-
	FREQUENCY RANGE	47 ~ 63Hz	-	-	-	-	-
	EFFICIENCY (Typ.)	80%	85%	87%	88%	88%	89%
	AC CURRENT	2.2A/115VAC	1.2A/230VAC	-	-	-	-
	INRUSH CURRENT(Typ.)	COLD START 75A(twidth=700μs measured at 50% Ipeak) at 230VAC	-	-	-	-	-
	MAX. No. of PSUs on 16A CIRCUIT BREAKER	2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC	-	-	-	-	-
	LEAKAGE CURRENT	0.25mA / 240VAC	-	-	-	-	-
PROTECTION	OVERLOAD	110 ~ 150% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed	110 ~ 150% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed	110 ~ 150% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed	110 ~ 150% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed	110 ~ 150% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed	110 ~ 150% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE PROTECTION RANGE	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V	41.4 ~ 48.6V	55.2 ~ 64.8V
	OVER VOLTAGE PROTECTION TYPE	Shut down o/p voltage, re-power on to recover	Shut down o/p voltage, re-power on to recover	Shut down o/p voltage, re-power on to recover	Shut down o/p voltage, re-power on to recover	Shut down o/p voltage, re-power on to recover	Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-25 ~ +70℃ (Refer to "Derating Curve")	-25 ~ +70℃ (Refer to "Derating Curve")	-25 ~ +70℃ (Refer to "Derating Curve")	-25 ~ +70℃ (Refer to "Derating Curve")	-25 ~ +70℃ (Refer to "Derating Curve")	-25 ~ +70℃ (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing	20 ~ 90% RH non-condensing	20 ~ 90% RH non-condensing	20 ~ 90% RH non-condensing	20 ~ 90% RH non-condensing	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80℃, 10 ~ 95% RH	-40 ~ +80℃, 10 ~ 95% RH	-40 ~ +80℃, 10 ~ 95% RH	-40 ~ +80℃, 10 ~ 95% RH	-40 ~ +80℃, 10 ~ 95% RH	-40 ~ +80℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 50℃)	±0.03%/℃ (0 ~ 50℃)	±0.03%/℃ (0 ~ 50℃)	±0.03%/℃ (0 ~ 50℃)	±0.03%/℃ (0 ~ 50℃)	±0.03%/℃ (0 ~ 50℃)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	UL8750, CSA C22.2 No 250.13-12, UL879, CSA C22.2 No.207-M89, EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved	UL8750, CSA C22.2 No 250.13-12, UL879, CSA C22.2 No.207-M89, BIS IS15885, EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved	UL8750, CSA C22.2 No 250.13-12, UL879, CSA C22.2 No.207-M89, EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved	UL8750, CSA C22.2 No 250.13-12, UL879, CSA C22.2 No.207-M89, BIS IS15885, EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved	UL8750, CSA C22.2 No 250.13-12, UL879, CSA C22.2 No.207-M89, EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved	UL8750, CSA C22.2 No 250.13-12, UL879, CSA C22.2 No.207-M89, EAC TP TC 004, IP67, IEC62368-1, BS EN/EN62368-1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC	I/P-O/P:3KVAC	I/P-O/P:3KVAC	I/P-O/P:3KVAC	I/P-O/P:3KVAC	I/P-O/P:3KVAC
	ISOLATION RESISTANCE	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH	I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(≤80% load), BS EN/EN61000-3-3, EAC TP TC 020	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(≤80% load), BS EN/EN61000-3-3, EAC TP TC 020	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(≤80% load), BS EN/EN61000-3-3, EAC TP TC 020	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(≤80% load), BS EN/EN61000-3-3, EAC TP TC 020	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(≤80% load), BS EN/EN61000-3-3, EAC TP TC 020	Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(≤80% load), BS EN/EN61000-3-3, EAC TP TC 020
	EMC IMMUNITY	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020	Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN55035, light industry level, EAC TP TC 020
OTHERS	MTBF	4497.1K hrs min. (Telcordia SR-332 / Bellcore); 681.6Khrs min. (MIL-HDBK-217F, 25℃)	4497.1K hrs min. (Telcordia SR-332 / Bellcore); 681.6Khrs min. (MIL-HDBK-217F, 25℃)	4497.1K hrs min. (Telcordia SR-332 / Bellcore); 681.6Khrs min. (MIL-HDBK-217F, 25℃)	4497.1K hrs min. (Telcordia SR-332 / Bellcore); 681.6Khrs min. (MIL-HDBK-217F, 25℃)	4497.1K hrs min. (Telcordia SR-332 / Bellcore); 681.6Khrs min. (MIL-HDBK-217F, 25℃)	4497.1K hrs min. (Telcordia SR-332 / Bellcore); 681.6Khrs min. (MIL-HDBK-217F, 25℃)
	DIMENSION	1905237mm (LWH)	1905237mm (LWH)	1905237mm (LWH)	1905237mm (LWH)	1905237mm (LWH)	1905237mm (LWH)
	PACKING	0.63Kg; 20pcs/13.6Kg/0.55CUFT	0.63Kg; 20pcs/13.6Kg/0.55CUFT	0.63Kg; 20pcs/13.6Kg/0.55CUFT	0.63Kg; 20pcs/13.6Kg/0.55CUFT	0.63Kg; 20pcs/13.6Kg/0.55CUFT	0.63Kg; 20pcs/13.6Kg/0.55CUFT

Application

12V LED strip lights, cabinet & indoor decorative ambient lighting
Garden, courtyard, fountain and villa outdoor landscape lighting
LED channel letters, light boxes, billboard advertising signage & display screens
Building facade wall wash lights, parking & greenhouse auxiliary LED lights
12V CCTV cameras, access control and low-voltage security equipment
Retail showcase, mall window and commercial store decorative lighting