Side-Emitting LED Strip

Side-Emitting LED Strip
Details:
The Side-Emitting LED Strip utilizes side-firing surface-mount diodes (SMD) to direct luminous flux at a 90-degree angle relative to the printed circuit board (PCB) plane.
Send Inquiry
Description
Send Inquiry

The Side-Emitting LED Strip utilizes side-firing surface-mount diodes (SMD) to direct luminous flux at a 90-degree angle relative to the printed circuit board (PCB) plane. This optical orientation provides uniform linear illumination in ultra-shallow profiles, tight radius bends, and edge-lit applications where traditional top-emitting strips cause visible hot spots or demand excessive depth. Built with rolled copper PCBs and automated surface-mount technology (SMT), this component integrates into architectural joinery, slim retail shelving, and custom channel letters.

 

Key Features

 

90° Optical Delivery: Emits light parallel to the mounting surface, eliminating dark gaps in side-fed profiles and edge-lit panels.
Strict CCT Binning: 3-step MacAdam ellipse binning ensures uniform color temperature across multi-reel installations.
Flexible Dual-Layer PCB: 2oz rolled copper traces reduce internal resistance, minimizing voltage drop over long single-feed runs.
Thermal Management: High-conductivity base material facilitates heat dissipation directly through the mounting substrate.
Modular Integration: Designated cut intervals with reinforced solder pads support custom lengths without circuit failure. 

 

Technical Specifications

 

Parameter

Standard Specification

Custom Options

LED Type

SMD 3014 / SMD 4010 Side-View

Consult engineering

Input Voltage

DC 24V

DC 12V

Power Consumption

9.6W / meter (0.14W/LED)

4.8W to 14.4W / meter

LED Density

120 LEDs / meter

60, 144 LEDs / meter

Color Temperature (CCT)

2700K, 3000K, 4000K, 6000K

Tunable White, RGB, RGBW

Color Rendering Index (CRI)

Ra ≥ 90

Ra ≥ 95

Beam Angle

120°

N/A

PCB Width

8mm / 10mm

5mm, 6mm (for ultra-slim channels)

Ingress Protection (IP)

IP20 (Indoor) / IP65 (Silicone Tube)

IP67 (Silicone Extrusion)

Operating Temperature

-20°C to +45°C

-30°C to +55°C

 

Customization Options

 

We support full-process OEM/ODM customization based on project blueprints or electrical requirements:

 

PCB Dimensions: Width reduction down to 5mm for restrictive channel profiles.

Electrical Parameters: Custom wattage and constant-current configurations for zero voltage drop over extended runs.

Optical Modifications: Integrated diffusion co-extrusion for spot-free elimination.

Pre-soldering & Wire Harnesses: Custom lead wires, waterproof connectors (IP67 plug-and-play), or rigid aluminum bar mounting pre-installed.

 

Applications

 

Architectural Cove Lighting: Concealed wall-wash and perimeter lighting in narrow ceiling recesses.

Retail Display Shelving: Edge-illumination of glass shelves and glass cabinet perimeters.

Signage & Light Boxes: Single-side and double-side edge lighting for slim advertising light boxes and channel letters.

Automotive & Marine Interiors: Accent lighting for dashboard contours, headliners, and cabin bulkheads.

 

Quality & Packaging

 

Quality Control Process:
Incoming Material Inspection: Spectroradiometer testing for LED chip wavelength and lumen output.
In-Process Monitoring: Automated Optical Inspection (AOI) post-reflow to detect cold solder joints.
Final Testing: 4-hour aging test under full load and 100% electrical continuity check prior to spooling.
Standard Packaging: 5 meters per anti-static reel vacuum-sealed in foil bags with desiccant.
Bulk Packaging: 50 reels per master carton with reinforced edge protection for international transit. 

 

OEM/ODM & Bulk Orders

 

Sample Policy: Engineering samples available within 3–5 business days for standard specs; custom samples require 7–10 days.

Lead Time: Standard production runs ship within 12–18 business days upon order confirmation.

Traceability: Each reel is laser-etched with a production batch barcode linking to raw material lot numbers and QC test logs.

 

FAQ

 

Q: What is the maximum single-feed run length to prevent voltage drop?

A: For DC 24V strips at 9.6W/m, the recommended maximum single-end feed length is 5 meters. Powering from both ends extends the usable run to 10 meters without noticeable lumen degradation.

Q: How do you prevent color variance between different production batches?

A: All LED chips are sorted strictly within a 3-step MacAdam ellipse bin prior to SMT mounting. We archive bin data per production order to guarantee exact color matching for subsequent re-orders.

Q: Can these strips be cut and reconnected on-site?

A: Yes. The strips feature designated copper cut marks every 50mm (DC 24V). Connections can be made using standard low-voltage solder joints or compatible 8mm/10mm strip-to-wire quick connectors.

Q: What waterproofing methods are available for outdoor or wet environments?

A: We offer IP65 (silicone sleeve) and IP67 (full silicone extrusion molding) options. IP67 variants withstand UV exposure, saltwater spray, and thermal cycling without yellowing or cracking.

Q: What is the expected lifespan of the LEDs?

A: The strips are rated for L80B10 > 50,000 hours at an operating temperature of 25°C, supported by thermal management practices that keep junction temperatures below design limits.

Q: What minimum order quantity (MOQ) is required for custom PCB printing or custom CCT?

A: The standard MOQ for custom CCT or PCB width adjustments is 500 meters per specification. Lower quantities can be reviewed on a case-by-case basis depending on material availability.

 

Request a Quote

 

To receive a formal quotation, volume pricing tiers, or technical data sheets, please submit your project requirements:


Target Specifications: (LED type, voltage, CCT, IP rating, quantity in meters)
Application Environment: (Indoor architectural, outdoor, marine, retail display)
Target Delivery Timeline & Destination Port
[Submit RFQ / Contact Engineering Team] 

Hot Tags: side-emitting led strip, China side-emitting led strip manufacturers, suppliers, factory

Send Inquiry