How to install cob long run led strip on a curved surface?

Nov 24, 2025

Leave a message

William Wilson
William Wilson
William is a sales representative at Shenzhen Tingliang Optoelectronics Co., Ltd. He has a wide network of customers worldwide. With his excellent communication skills, he can effectively introduce the company's LED lighting solutions and build long - term relationships with clients.

Hey there! I'm a supplier of COB long run LED strip lights, and I'm super stoked to share with you how to install these awesome lights on a curved surface. Whether you're looking to add some cool lighting to your home decor, a commercial space, or a DIY project, this guide will walk you through the process step by step.

Why Choose COB Long Run LED Strip Lights?

Before we dive into the installation process, let me quickly tell you why COB long run LED strip lights are a great choice. COB (Chip on Board) technology packs a bunch of LEDs closely together on a single circuit board, which means you get a more uniform and brighter light output compared to traditional LED strips. And the long run feature allows you to use longer lengths of the strip without experiencing significant voltage drop, giving you more flexibility in your lighting design.

We offer a variety of COB long run LED strip lights, like the COB 504LEDs 10M Long Run IP20 LED Strip Lights, COB 504LEDs 20M Long Run IP20 LED Strip Lights, and COB 360LEDs 13M Long Run IP20 LED Strip Lights. These strips are perfect for both indoor and outdoor use, depending on the IP rating.

Tools and Materials You'll Need

  • COB long run LED strip lights
  • Power supply (make sure it's compatible with the voltage and wattage of your LED strip)
  • Double-sided tape or adhesive clips
  • Wire cutters/strippers
  • Soldering iron and solder (optional, for making electrical connections)
  • Heat shrink tubing (optional, for protecting electrical connections)
  • Measuring tape
  • Masking tape
  • Safety glasses and gloves

Step 1: Plan Your Installation

The first thing you need to do is figure out where you want to install the LED strip on the curved surface. Take some time to measure the length and circumference of the curve to determine how much LED strip you'll need. It's a good idea to add a little extra length to account for any mistakes or adjustments.

Once you have your measurements, mark the starting and ending points of the installation area with masking tape. This will help you keep the strip straight and in the right position during installation.

Step 2: Prepare the Surface

Before you start applying the LED strip, make sure the curved surface is clean and dry. Any dirt, dust, or grease on the surface can prevent the adhesive from sticking properly. You can use a mild cleaning solution and a cloth to wipe down the surface.

If the surface is rough or uneven, you may want to sand it down a bit to create a smoother surface for the LED strip. Just be careful not to damage the surface.

Step 3: Test the LED Strip

It's always a good idea to test the LED strip before you install it. Connect the LED strip to the power supply according to the manufacturer's instructions. Make sure all the LEDs are working properly and that the light output is as expected.

If you notice any issues, like some LEDs not lighting up or a dimmer section of the strip, you may need to troubleshoot the problem or replace the strip.

Step 4: Cut the LED Strip (if necessary)

Most COB long run LED strip lights can be cut at specific intervals, usually marked on the strip. Use wire cutters to cut the strip to the desired length. Make sure to cut along the designated cutting lines to avoid damaging the LEDs or the circuit board.

If you need to make multiple cuts, it's a good idea to label each section of the strip to keep track of the order during installation.

Step 5: Apply the Adhesive

There are two common ways to attach the LED strip to the curved surface: using double-sided tape or adhesive clips.

  • Double-sided tape: Most LED strips come with pre-applied double-sided tape on the back. Carefully peel off the backing paper from the tape, starting from one end of the strip. Hold the strip in place on the marked starting point of the curved surface and slowly press it down, following the curve. Make sure to apply even pressure along the entire length of the strip to ensure good adhesion.
  • Adhesive clips: If you're working with a surface that the double-sided tape won't stick well to, or if you want a more secure attachment, you can use adhesive clips. Attach the clips to the surface first, following the curve, and then slide the LED strip into the clips.

Step 6: Bend the LED Strip

Now comes the tricky part - bending the LED strip to fit the curve. Start at one end of the strip and gently bend it along the curve of the surface. Take your time and be careful not to bend the strip too sharply, as this can damage the LEDs or the circuit board.

COB 504leds 20M Long Run IP20 Led Strip LightsCOB 360leds 13M Long Run IP20 Led Strip Lights

If the curve is very tight, you may need to make small cuts in the strip at the non-LED areas to allow it to bend more easily. Just make sure to seal the cuts with heat shrink tubing or electrical tape to prevent moisture and dust from getting in.

Step 7: Make Electrical Connections

Once the LED strip is in place on the curved surface, it's time to make the electrical connections. Connect the positive and negative wires of the LED strip to the corresponding terminals on the power supply. You can use soldering iron and solder to make a more secure connection, but if you're not comfortable with soldering, you can also use wire connectors.

If you're using multiple sections of LED strip, you'll need to connect them together. Make sure to match the positive and negative wires correctly and use heat shrink tubing or electrical tape to protect the connections.

Step 8: Secure the Electrical Connections

After making the electrical connections, it's important to secure them to prevent them from coming loose. You can use zip ties or electrical tape to hold the wires in place. If you're using heat shrink tubing, use a heat gun to shrink the tubing around the connections, providing an extra layer of protection.

Step 9: Test the Installation

Once you've completed the installation and made all the electrical connections, turn on the power supply to test the LED strip. Check to make sure all the LEDs are working properly and that the light output is uniform along the entire length of the strip.

If you notice any issues, like flickering lights or a dimmer section, you may need to check the electrical connections or the power supply.

Step 10: Finishing Touches

Once you're satisfied with the installation and the LED strip is working properly, you can remove the masking tape and clean up any mess. You can also add some decorative elements, like diffusers or covers, to enhance the look of the lighting.

Tips and Tricks

  • If you're working with a very large or complex curve, it may be helpful to have a second person to assist you in holding the LED strip in place while you're bending and attaching it.
  • When making electrical connections, make sure to follow the manufacturer's instructions and use the correct gauge of wire.
  • If you're installing the LED strip outdoors, make sure to use a power supply and electrical connections that are rated for outdoor use.

Conclusion

Installing COB long run LED strip lights on a curved surface may seem a bit challenging at first, but with the right tools, materials, and a little patience, you can achieve a professional-looking result. Whether you're looking to add some ambient lighting to a curved wall, a staircase, or a piece of furniture, these LED strips are a great choice.

If you have any questions or need more information about our COB long run LED strip lights, or if you're interested in purchasing them for your next project, don't hesitate to reach out. We're here to help you with all your lighting needs.

References

  • Manufacturer's instructions for COB long run LED strip lights
  • General knowledge of LED lighting installation techniques
Send Inquiry